… While employed on this work Fischer von Erlach was called in to arrange the garden of the
Liechtenstein Palace, a building designed by Domenico Martinelli, and carried out a very fine …

… A diamond detector consists simply of a diamond 10–1000 μm thick that is metallized on
both sides with high-voltage (HV) bias electrodes to collect the charge carriers (electrons and …

… , ΔE loss is the energy straggling in the start detector, Δq is the average change of the
charge state of the ions upon their passage through the start foil and V foil is the high voltage …

… The anode of the MCP is at positive high voltage to allow the grounding of the start foil. … of
the ions leaving the start foil and Vfoii is the high voltage potential of the foil. In our case VfoiJ is …

The electronic part η (the Hopfield factor) of the electron-phonon coupling constant λ for
alkali-metal-doped fullerenes A 3 C 60 is calculated within the rigid muffin-tin-potential …

… The results of this study indicate that some cement shades, namely WO and HV + 3,
produced clinically unacceptable color change in the bonded ceramic disks. Therefore, the null …

… Vivadent, Schaan, Liechtenstein) and automatically pressed … The HV values determined
in this study are the result of the … values of HV and E along with small C values. In this study, …

… The accelerator used was an AN 2000 Van de Graaff from High Voltage Engineering
Corporation. Back- scattered ions were detected at a scattering angle of 170using a silicon surface …

… DC and HV were measured at the top and bottom of the specimens. PVS was measured
using Archimedes method (n = 6). PSS measurements (n = 10) were carried out using 5 mm …

… More systematic comparative lifetime measurements for differently produced ultra-thin
stripper foils are to be conducted in the HV terminal of the Heidelberg MP-tandem accelerator. …